A squeak in parquet caused by two pieces of wood rubbing against each other is irritating. One way to avoid the noise is by reducing the friction of moving parts with a lubricant to. Do not use oil, but a scattering of fine powder with graphite.

It is available in local hardware stores most are free to use locking mechanisms. But if you’re a bit on the ground, so that I can work the way of creaking floorboards, it may well reduce or eliminate the sound.

If it does not work, you can always try a few well-placed nails. You need pre-drilled holes in the wood slender, slightly inclined to one another. Then drive the nails, be careful not to bang around the floor of the hammer head.

You can make an 8D or 8 cents finishing nails, a very small head. Then the wood surface treated with a series of nails. Now you can say goodbye always squeak. You need a hammer, a small drill and a cordless drill. It should not take longer than 15-20 minutes.
Now that the migration use a filler stick to the same color as the word for a nail-hole that is visible below. If your floor is showing their true age, you will be able to reinstall from the surface for about one quarter of what it costs, a ninth-floor window.

You can sand and refinish usually up to a total of four times before so much wood on the floor, the nails of the body begins to appear. Floor should be as good as new.